TOOLIOM Aluminum MIG Welder with Pulse 250A 110V/220V Dual Voltage 6 in 1 Multifunctional Welding Machine Pulsed MIG/Gas MIG/Flux Core/Spool Gun MIG/Lift TIG/Stick

Excellent welder- I use it every day.

Easy for an amateur to use. I set it to the auto function, and it matches the wire feed speed with the amount of heat I dial in. I use mig with flux core exclusively, and I get much better results with this than I did with my Chicago Electric 170 amp. I wish I had upgraded sooner.

Im a welder by trade. Bought this machine to weld some alluminum at home. First it never welded good at all very dificult second it lasted about two hours of welding then it stopped working third costumer service gave me the run around for two weeks and i just gave up and took my lose you get exactly what you pay for

Funcionó exelentemente

Perfecta para todo tipo de trabajos

Para soldaduras ocacionales,es muy buena,he realizado algunos proyectos pequeños sin problemas

Súper recomendada

Mig option didn’t work on mine Electrode mode works fine in 220

This welder packs a lot into a very reasonable price. It can do MIG, Flux MIG, Pulse MIG for Aluminum, Spool Gun, Lift TIG and Stick. The kit comes with very good quality accessories. The MIG gun and work clamp have nice long cords. They are rated to handle the 250 amps and use the mid size connector to the machine. I think they are called DINSE 35. Included are four different wire feed drive wheels, a graphite MIG liner, Power adapter to 110 v, well written manual, MIG gun, work clamp, and a large sticker with settings and cheat sheet. All excellent quality and properly rated. There is also an assortment of contact tips and nozzles and a spool adapter for larger spools. The controls are very well laid out with nice large knobs and buttons and a bright readable display. Pulse mode only works with MIG aluminum. According to the manual, pulse mode won't work with a spool gun. The machine has a European (Euro) connector. There is a 2 pin aircraft style connector for the spool gun motor. A spool gun would need to be 24 volts. Synergic mode works well. In MIG synergic, you can micro adjust the voltage -3 to +3 volts.. You can also adjust the inductance from -5 to +5 which should adjust the heat put out by the spark. The wire feed mechanism is metal. It is slightly awkward to get to but much better than others I have used. There is plenty of room for the larger spools. The spool holder has a proper tension system. Large spools use the included adapter. Some smaller spools may cause the retainer nut to tigthen when they rotate. My only complaint is that it is too easy to accidentally switch to pulse mode which changes the machine to Aluminum settings. Welding with the machine is nice. Synergic makes it easy to get that nice frying bacon sound and pulse MIG makes nice clean shiny welds.

Very Good for the money. Been using it 2 weeks. Got all you need. Welds very well steel. Aluminum works quite well too, not as good as a 8k machine but plenty for that price. I went trough a roll of aluminum and it jammed only once and it was my fault. Beware, my graphite liner was clogged from factory and broke at the joint with the spring. The Nozzle is too thin and becomes too hot too quick. Change it for quality one. If you weld too long the plastic near the end of the nozzle will melt with the cheap nozzle. Works as well as my brother in law 2000$ machine.

TL-250M Pro With pulse. I bought this welder on sale having a great experience so far. Will update the review if things stop working. Pulse only works in aluminum mode, but nothing is stopping you from welding steel in aluminum mode, Just need to fiddle with the voltage a little and it works well. I used this welder 99% so far for MIG welding with a 25%co/argon mix gas and cheaper 0.035 wire from the welding store. I tried stick welding with a 7018 I wasn't able to get it going well, confident it was my fault, however i think the stingers clamping power could be a little more, I have never used a stick welder before. I also did some flux core welding with it, worked fine Will be using it again in the future for driveway welding on vehicles. I build an entire Coastal offroad bumper for a GX with this welder used about 7Lbs of wire so far my only issue is the only issue ive had so far was the nozzle diffuser and gas nozzle started arcing together as junk got stick in there. I ended up having to cut the nozzle off because the inside and outside separated. Not a big deal I should have cleaned it more often It looks the same as the Lincoln 100L gun nozzle might try one of those. Overall this welder outperforms my lincoln 180 Mig from canadiantire and is 2/3rd the price, Time will tell if it will last as long.

Customer Service is garbage. After getting the welder I was switching the drive roller and found that the drive roller was stuck on. Contacted customer service from Tooliom directly and they kept making suggestions that were wrong. First they suggested to remove the wire that wasn't there. After providing a video of proving no wire is installed they had suggested my mig gun was installed. The mig gun was partially removed enough so the feed tube wasn't touching the drive roller. I showed them that the mig gun partially removed wouldn't make a difference while providing a video on what it looks like. After that they have began to ignore me outright. Not only do they not know their product but don't know how welders work. Maybe the welder works great but the customer support is terrible.

Love this machine so far!! For the price it’s a great little unit. Cant run it on 110 though, just blows my breaker. 220 and i can run it all day. Even did 6010 with it, it doesn’t like it but you can do it. Got the spool gun, runs aluminum great so far. Mig runs great, tig runs smooth, and stick runs good too. Perfect for little projects where i don't want to fire up my rig and big Desiel welder.