WEIZE Front Truck & Tow Brake Kit, Carbon Fiber Ceramic Brake Pads & Drilled/Slotted Brake Rotors, Replacement For Ford F-150 F150 2010-2020 Expedition Lincoln Navigator

I bought these brakes for my 2015 Jeep Compass Sport 2WD 2.0LI did a lot of research on brakes and was having trouble finding a set of pads/rotors that had good reviews for the MK model Jeeps (Patriot/Compass 07-16). I came across these and decided to roll the dice in hopes that they would be atleast as good as the OEM brakes. I installed them myself, following a few instructional YouTube videos. This is the first time in my life I’ve done my own brakes.The install went off without a hitch, the only minor setback I had was the original passenger side rotor didn’t want to come off, but I found a trick via YouTube to get it off with a bolt, nut and two wrenches. They fit perfectly on my Compass and I made sure to put lubricant and anti-seize in the proper locations. After installing them, I did the break in procedure recommended by Weize in the instruction manual.I have been very happy so far with these brakes. They function great and I didn’t have any problems with squeaking, grinding, vibration or other noises. At this price, I don’t think you can get better brakes for the money. They’re an incredible value and the stopping power is just as good if not better than the original brakes.One thing to note about the quality is that the drill holes and the slots in the rotors are positioned so they interact with the brake pads. On some other cheap rotors, the holes/slots extend way past the area the pads would come into contact. These are positioned correctly so you get maximum interaction of the holes/slots with the pads.I’ll keep this review updated as time goes on to let you know about their longevity and if any problems crop up over time. So far so good!UPDATE: I took my Compass on a 9 hour one-way trip from Kansas to New Mexico and the brakes performed great! Had to drive through the rain half the way on the trip there, and also did a fair amount of driving through mountains in New Mexico. The brakes performed great and they’re still going strong. My mom drove some of the trip too and said she though the Compass braked well without being too sensitive or too squishy, just the perfect amount of response from the pedal. I’m not noticing any problems with lots of brake dust, but I do make sure to blow them off with the air compressor in our garage every once in a while. Also did a drive from my home to Kansas City and back (4 hours each way), and they did fine on that trip too. It’s been a few months now that I’ve had them on there and everything is going well. Planning to paint my factory calipers black to match the drums on the rear.

This turned out to be an excellent investment! The Rotors and pads are all very high quality!The sets were packaged great, and they included instructions. Amazingly, this set was literally half the price of identical sets from other brands. These are vented, drilled, and slotted rotors with carbon fiber & ceramic brake pads.I installed these on my 2015 Chevrolet Equinox LTZ AWD 3.6L SUV. I use my SUV to tow my Tiny Home/RV to new locations on a regular basis. The factory rotors had warped from use in the mountains. This WEIZE set is made for towing. My Trailer is all aluminum with dual axles and electronic brakes with a computerized brake controller too, so that helps.Doing my brake rotors and pads replacement myself cost me literally 10 times less than getting it done at a shop! I did the rear brakes one day and then the front brakes several days later. Each day of work was about 3-4 hours as I took my time with it being the first time on this vehicle. In addition, I was doing the replacements off-road.I bought a brake bleeder kit, but I didn't even need it. I just used a caliper compressing tool and opened the bleeder valve with the valve higher than the hose and closed the valve quickly.I am very thankful I got this WEIZE Rotor and Pads kit. The brakes have been performing fantastic.

Installed on 3/4 ton Chevrolet. Perfect fit. Product is very well made and the price is great for such a product. No more bouncing when I step on the brakes. Satisfied customer.

Rotors and pads fit like expected and no issues with the install today. Definitely recommend getting a cheap piston compression tool and caliper hanger for the job. You'll have to make sure that the slotted direction is going the correct way. The slots are more indents than actual machined slots all the way through, but I suppose it will cool just fine with typical aggressive grocery getting activity...On break in, the instructions mentioned two different methods and didn't appear to say which to follow for these rotors and pads, and they are different (see photos). I chose to not follow the bottom method where you start with aggressive braking, and ended up really doing both. Also, aggressive braking can be wildly different, depending on who's interpreting that. I did the top suggestion of around 30 decelerations from around 30mph to 5mph and making sure to never be stomping on the brakes when very slow or stopped after they are really hot. 1/4 mile or 30sec cool down between each. I then also did the 40mph to 10mph more aggressive braking, followed by the 5 moderate but back to back braking from 35 to 5mph. Drove for a little while with little to no braking for cool down. They bed fine and appear to be working well. I'll update after some use if anything noteworthy develops.

Fit perfect. I’m very pleased with the quality and happy price was really good.

These work fantastic and the price is actually unbelievable for what you get. I'm actually kind of Blown Away that must set a brakes and rotors were only around $100. Then you add in the fact that the rotors are drilled and slotted, plus they have anti corrosion coating on them. The brake pads seem to grip real good and they are a carbon fiber ceramic blend. Which I really like because they grab better than ceramic pads, but also don't dust like metallic pads.I have no vibrations or any issue with them. At first I didn't think it came with the metal Clips but they were under the second rotor.

Noise level I great ,Easy to install,great quality,stopping power is good ,so far they work great ,not much brake dust at all,just make sure to follow the instructions after installing them .I was nervous at first because it was such a great deal but I'm very happy with my purchase 👍🏽👍🏽👍🏽

It seems to be great I have a couple of hundred miles on them no noise feel great !!! 1/2 price of local parts store and probably much better quality