KAWELL Universal 2 Lead LED Light Bar Wiring Harness Kit with Fuse Relay ON Off Switch for Offroad Driving Light Lamp Fog Light Work Light 12V 40A Waterproof

This harness is great for the smaller wattage rated LED lights. It's a shorter harness and is more of a light duty type for use with two 18w-27w LED lights. I used this harness for the windshield hinge lights on each side of my jeep. I didn't need a long heavy wire harness for this area. The lights are so close to the power source and switch placement. This harness was very easy to install for the application it was used. I couldn't build one as fast or what this cost. As with most of these pre-made harnesses, if you have problems with the switch or don't like it, it's very easy to replace the switch with one that suits your needs

My Smart Fortwo did not come with fog/driving lights from the factory. Dealership wanted an arm and leg to have these added. Activation required having them programmed into the car as well. A bit of online research for parts and aftermarket lighting instructions and i was closer to having the lights become reality! This harness made it happen! Quality seems solid and no issues were encountered! Happy to say that a few months later, the harness is still functioning!

This is a good wiring harness. I didn't get a diagram with my order but I just printed the picture of the one off here. It's pretty straight forward to install. Believe me I'm no electrician in any way. I had plenty of wire length to hook up the LED foglights I installed on my SUV. The switch is ok. It's not a fancy toggle switch and the light staying on all the time kinda sucks. But it is nice because you know when the system is on and off. As far as I can tell it doesn't really drain the battery, but winter is coming so we'll have to wait and see. But, for the price this was worth it. Trying to wire the lights yourself would cost more than this.

Wish I would have found this a long time ago. Ive been making my own harnesses for years and its not hard but it does get to be a pain in the rear. This showed up on my door step and I honestly wasn't expecting much, I thought there would be tool marks all over it and the switch would be trash but man was I WRONG. Every thing comes wire loomed so theres no mess in the engine bay, all the ends have heat shrink on them and over all it feel's like something OEM. A few people have griped a little about the red led on the switch and I don't find it to be all that bright. (If it bothers you a little creativity with some black paint could help you) another tip with the switch is if you decide to use the double sided tape make sure you prep the area your sticking it too with a little rubbing alcohol on a rag first. It sticks very well to a clean surface and not at all to a greasy armor alled one. I had plenty of length from the leads to the light and through the firewall to the switch. Which brings me to my only suggestion for improvement and that is I wish the lead to the battery were a little longer. I ended up adding about 2 feet to the battery positive lead. Not a big deal at all though. Great kit ill be buying these from now on when I'm wiring auxiliary lighting! I used this to wire a single row 31" led light bar.

I've ordered a couple of these things, mainly because they are convenient. the switch is garbage, and ive cut them off and replaced with rocker switches, and the relays are junk as well, again, replaced with decent Bosch relays. the wire is decent, and the harness works, otherwise.

I bought this kit to wire some Kawell LEDs on my Jeep WJ. Pros: Very easy to install, came with a helpful diagram. substancial wire, coating, connectors, and switch. Cons: Everything was just a LITTLE too short to run the lights cleanly, and I was only going from the top of my hood. If t=I have been putting them on the front of my vehicle (i.e. as fog lights), it would have been impossible without splicing in more wire. Also, the provided switch has and LED indicator light that is on at all times, even when the Jeep is off. It is a small thing, but it bothers me... Overall: A heck of a lot easier to rig up than going from scratch. Very affordable. I would buy again, but would also get some additional wire to add in.

Wiring kit works as it's supposed to no big issues aside from the on of switch. The adhesive is basically pointless stayed on for less the 5 seconds. Not a big deal for me I have a switch I'm going to just hook it up to on my dash. But other then that works great very easy straight forward to install. Plug and play set up. Cord length is perfect actually have more than enough. Would recommend.

I installed this and a Kawell LED light bar on my H-D FXD. This harness is excellent. It is long so I had to do a little bit of cutting and splicing but when everything was plugged in and tucked away my light works great. I was unsure about splicing the light bar into my headlight so this harness was a great, practical, and economical solution.

Very nice harness, very high quality! Solid connections with tough wire wrap over entire harness. Harness will provide power even with ignition off. I removed wires from relay switch on/off circuit & replaced with leads from my ignition for power only when machine is running. Overall great harness that I'll definitely buy again!

My order came fast , install was easy with the wiring harness I ordered also although it would be short if it was installed on a truck , mine is a Chev van . The only thing I would recommend the manufacturer would use is Allen Head bolts on the angle adjusters , the regular bolts are very difficult to access with a wrench or socket once the units are mounted . Otherwise , nice and bright , I ordered these with the amber removable covers for light options. I left out one star for the adjuster bolts .

A real nice kit, made wiring up my ditch lights a snap, took me literally 15 minutes to finish. Connections are solid and the wiring nicely insulated, would buy again for my next set of lights.

Perfect little harness. Lots of length for what I needed. Well put together.

Switch feels very cheap. Not sure how long it will last with extended use. The leads to the lights is very short. Only can use (without modifying) for front mounted lights. Description should specify this. Other than that, everything works as expected.