720P Backup Camera

This short message is about some mistakes that can be made during the installation of backup camera GreenYi HD720 on your car. The booklet with instruction from manufacturer has two wiring diagrams, and none of them is correct when we talk about Camry 2012 Basic (also 2013 and maybe 2014). First of, the Camry uses + 6 volts for triggering and feeding their original camera (that's what I was told by the seller of harness) , and this makes potentially harmful for your car using +12 volt for triggering and feeding aftermarket cameras such as GreenYi HD720. More expensive models of Camry have a special connector for feeding their original camera, but since Basic model has no such connector, there is no reason to buy the original camera and pay for it triple price compare to GreenYi HD720. The second point is that the Camry DOES NOT require triggering for correct work AT ALL! At the very moment when you turn the gear to REVERSE position, the system tries to catch video signal and if it's detected it will be translated to the display right away. If system does not recognize the video signal, the screen stays the same. When you turn the gear to any other position like Parking or Neutral, system blocks video and return previous screen to display. As simple as that. So you can easily forget about triggering wires and leave them alone. But you do need to get additional single wire for getting +12 volts from other spot. It has to be just about same length as video cable. The size should be 18-20 AWG, copper is preferable. The camera suppose to work all the time because the time of detecting video signal is very short and camera has a delay between applying the voltage and getting itself into full working mod. For this reason you cannot use reverse light wires for getting +12 volts from them, it's just not going to work. You have to use additional cable and get voltage either from cigarette lighter, or from fuse box or from another connector on the radio which has +12v wire. I have used the last option (grey colored wire from the last connector on the right side of the radio, if you look in front of display). I've attached the ground (black) wire from camera to the frame. Everything works flawlessly now. That's all what I'd like to say. Good luck with installation! :) PS This is my first back up camera and I have nothing to compare with, but you have to be aware that the wide angle camera has some specific features - it does catch a bigger picture but at the same time it makes harder to estimate the actual distance to the objects (because of fish eye effect). So its hard to drive backward looking only to display. I look at the display at the very last feet to the obstacles like the a wall, carb etc. and when I about to start moving back. I just want to say that the camera is a great control unit, but don't thing to use is for continuous driving backward.

I installed this in a 2013 Toyota Camry SE and the default angle of the camera looks good without having to use the included rubber wedge. It wasn't too hard to install. I had to drill a hole for the camera itself and a second hole for the wire to go into the trunk. I used a file to smooth out the edges of the hole and put electrical tape inside it so that it would be less likely to damage the wire. My Camry had the fancy screen already but no backup camera. I used this camera along with an adapter wire for the radio to make it work. The camera powered on all the time so that when the radio looks for it, it finds it. If it does not sense a camera connected, nothing happens. If you try to use the power wire from the reverse light, it will take too long to power on the camera and the radio won't see the signal and nothing will come up on the screen. I first ordered a cheaper $15 camera but the FOV on it was about 45° and not useful at all. This one is plenty wide, looks like 170° to me, and makes objects behind me easy to see.

I have this installed on my 2003 Sienna. Since the latch is right above the license plate those license plate mounted cameras would block access to it so this bottom mounted camera was perfect. I also like the fact that the wires are within the camera which made routing the wiring very easy. Paired with my Atoto Receiver I was able to use the AHD 720P format. The picture is clear both during the daytime and at night. My only issue is that the camera is angled lower than I would like. At its present angle I can only see my bumper and several feet of the road - I would like to angle it a little more upward so I can see more of what's behind. I'll probably correct this with the wedges that come with kit but for now at least I can see how close my bumper is to the wall.

Instalation was super easy, gives fast clear veiw. I used this on an old Avalon and was really impressed. Great option for you DIYers. i saved hundreds of dollars by doing this myself #keepemkidssafe

I had purchased another camera that didnt angle down enough to help much when hooking a trailer up to my truck. I could see the trailer hitch, but not my truck ball so I often backed up too short or too far and had to wrestle the trailer the rest of the way to get it connected to my truck. Having a camera like this that points mostly down toward the ball has sure made it much easier to hook the trailer up. I can now see the ball and about 3 inches of the receiver in front of the ball perfectly as I back up to the trailer. I reused most of the cabling from the old camera when hooking up this new fisheye camera so installation was pretty fast and easy. I couldnt get that dang split nut screwed on, so I just used the double sided sticky tape that came with the new camera to mount it which seems to be holding up just fine. Both the new and old cameras cost about the same, so I didnt expect much difference in video quality. It turns out this new camera has a lot clearer image even though my radio only supports CVBS video mode. Night vision is what really impresses me on this new camera. The only con so far has been that it is taking me a little while longer than expected to get use to the fisheye effect. Focusing on the ball and trailer hitch is easy enough, but focusing while backing into a parking spot while trying to stay centered between the severely curved lines is a bit more difficult. I find that I avoid backing into parking spots and now simply use the camera to check to make sure that I pulled passed the line before I put the truck in park. Note: hooking up the camera went smooth and the camera worked perfectly before I tried tidying up with zip ties. After zip tieing all the wires the camera stopped working for some uncertain reason. It only took a few minutes to troubleshoot though. I simply had to unplug and replug in the yellow video cable at the back of the truck to make the video come back on. I probably even gave it a little spin after reconnecting it. The cable was already fully inserted, so I dont know why unplugging it and replugging it worked. So far it hasnt happened again, so fingers crossed all is now good.

Solid camera. Feels solid in your hand. Working of good quality. Image quality very good, connected to the factory screen on a 2014 Grand Cherokee. Looks like a factory install from the outside, and only the suboptimal placement of the guide lines gives it away while in use. This style camera is a pain to aim, requiring removal of several panels and about 20 screws to access on this vehicle. But it definitely doesn’t look cheap or tracked-on.

Easy to install although the instructions are basically useless. For the RCA wire some are pictured with a red(power) wire but for some reason mine was yellow which is a little odd. Worked the same. Also purchased the harness adapter separately to attach to the head unit. Camera seems heavy and made of good materials. All wires and nuts and bolts were in the box. Great little setup for my 2013 Camry SE.

Not even close to what's advertised. The pics show the green car with the installed camera on the rear bumper area, centered. The red car on the right in the vehicle view is the same red car barely seen on the camera view. For viewing area calculation purposes, it's 20' straight back and approx. 50' over to the location of the red car. That makes the viewing angle approx. 140 deg, max viewing angle and 135 deg practical viewing angle. To be 170 deg as advertised, the distance on the edge of the camera view would need to extend another 50' (on each side). The horizontal pics are on the same camera and shimmed with the manufacturer's included shims so that the view is as close as possible to the rear bumper meeting an obstacle. The toolbox is still about 9" from the bumper. The item in the background of the bumper to wall pic is at the same height of the camera and that makes the horizontal viewing less than 90 deg in a straight back view. It's only close to 120 deg, at best, as you move further out and to the edges of the monitor.

This install was pretty easy being proficient in working with wires. The clarity of the video is great!

camera is nice, only i didn't get full package like on picture.

Excellent picture quality and easy to install. Impressive for the price.

Good product, clear image

It works on my 2005 tucson with a car headunit android 8.1. It provides clear and wide view.