iPong V300 Table Tennis Training Robot - Serves 40mm Regulation Ping Pong Balls Automatically - Play Solo w/o Playback Mode on your Ping Pong Table - Various Models Available, Size 19 , Blue

Just received my iPong V300 last week. The assembly was very easy and straight forward. I did follow suggestion from some customers and put a smooth tape on the motor top to reduce friction force from the pressure, and I loaded 120 balls and the robot never jammed even once. It worked very smoothly, it can produce topspin, backspin, with different speed, and can oscillate from left to right. Love the remote. It was fun to play and the kids love it too. Compared to some other more advanced products that could easily cost $600 to $2500, this iPong V300 is really a bargain, and it's amazing that the robot can do most of the work, more than enough training for the beginners and mid-level players, for only $119. I'm very satisfied about the product. If you are a pro or advanced player, then spend $2000 to get a sophisticated robot model, otherwise, if you are beginners or mid-level players to play for fun, then this iPong V300 is an excellent choice for you. Highly recommend !

The iPong V300 is quite a nice machine. Adjusting spins, oscillation, and frequency is a breeze with the included remote control. I have used the machine for about two weeks now and have had minimal issues. One time, the spinner inside did not work, so no balls would come out. However, that started working again. It is also a challenge at times to get the machine positioned so that the balls hit my side of the table rather than missing (too long) or hitting the net (too short). Overall, the machine is consistent, but the slight variability of the trajectory means that you will get a variety of results. It would have been nice to receive a set of suggestions for settings/placement in the box, so there was less experimentation. Want to return a backspin serve directed to your forehand? Place the machine here and use the following settings. Want to return a looping topspin shot to your backhand? Place the machine here and use these settings. Unfortunately, those suggestions are missing, leaving the user to recreate the wheel. That said, I'm happy with the machine and have had a lot of fun so far. Also, I suggest pairing this machine with the iPong table tennis catch net ( iPong Carbon Fiber Table Tennis Ball Catch Net ) so that when you play 100 balls, you don't have to pick up 100 balls off the floor! Good luck.

As an X professional table tennis player I wanted to try this for my son BUT this product should not be in the market period!!, WHY? because it takes the energy and motivation and FUN out of any beginner or intermediate player, it jams continuously and it takes the fun AWAY!!!, this machine needs a lot of upgrading and attention, don’t know why it is still in the market. If I had a ZERO star I would have given it.

Intermediate player here, bought it to practice shots and improve my technique. 4 out of 5 stars because I think it did help but here is some feedback. Btw, I bought it in Dec 2023, whatever model version that means. 1. The slowest frequency setting is fast if you're a beginner. Also fast for someone doing focused drills for technique improvement. I'll explain below how I slowed it down a little bit. 2. I have not had a ball jamming issue as much as I see in other comments (very rare). Just be smart about it. The rotating feeder opening should be behind the feeding hole when you fill it with balls. Make sure you're gentle with the rotating feeder disc if you need to adjust its position. Very fragile! 3. The oscillating base sometimes stops randomly for several seconds. 4. You have to play with the top spin and back spin settings a little bit to understand how much and what kind of spin and speed you want without the robot shooting the ball straight out of the table. 5. Definitely buy a net if you want to practice a lot. Saves your back and you don't have to spend too much time collecting balls for the next round. 6. Wish it allowed side spin as well. Here's what I did to slow down the feeder by about 25% (only do this if you know what you're doing and be very gently all throughout). Disassemble the top and bottom conical parts. Also remove the rotating feeder disc very gently (not required, but I did it out of fear of breaking it since its too fragile). Remove the front half of the main body (the side that has the LED screen). You don't need to remove any screws in the entire process. Just depress the the top and bottom clips and separate the front half (be careful not to pull it out too hard, the LED screen cable may break off). Behind the motors you'll see a PCB and 4 connectors on it going to the four different motors. Each connector is labelled on the PCB silk screen. You'll want to disconnect the one that says "MF". For me that was the first connector. Be gentle removing the glue on the connector (and you don't need glue when putting it back). Put a 2Ohm 5Watt resistor in series with the black cable. I just cut the cable, slid heat shrink on either side, soldered the resistor in series, covered the exposed electrical ends with the heat shrink. Be sure you're not using a resistor with less than 5Watt power dissipating capacity. Also, do not put a bigger resistor than 2Ohms (3Ohms may workout, but test it first with all the balls loaded before putting back all the assembly) because you're reducing power going to the feeder disc motor and you don't want it to jam on you with all the balls loaded. Now put back all the assembly in the reverse order. Helped me slow down by about 25% which I could appreciate during my practice sessions. Tested up to 90 balls and it did not jam for me. You're welcome!

Nos hemos divertido con el aparato, funciona bien

Pros 1. Assembly was easy and done in 2 mins. 2. It can get intense and definitely train you on your basic moves. 3. It can hold more than 100 balls. 4. The remote control is brilliant and allow you to adjust the speed, frequency and turning. Cons: 1. The first 2 serves will always be stronger and tend to miss the target. But shots after that were on target.

Excelente, funciona perfeitamente e cumpre exatamente o que diz a descrição,estamos amando!

This unit does NOT include battery power. However, can buy a USB-9V convert cable and powered by power bank.

buen producto