RCA Switch box

Let's face it, when in the market for RCA cable switchers, one usually finds a variety of cheaper made models and it's not unusual to see the same model being marketed under different brands. This is often par for the course with these inexpensive Chinese branded models. In my case, I have 6 different DAC's that I use with my desktop PC, attached to a variety of speakers. Yes, I do online reviews and provide comments regarding performance characteristics of different pieces of equipment. So last week I began to look for a good 4-unit RCA Audio cable switcher. And mannnn, there were tons of them on Amazon - most were very cheap in price, while a few ranged between $100 and $200 USD. I was eventually eyeing one that cost close to $200, when I happened upon this GOHIFIAUDIO S1 switcher. I thought, "Hmnnnn, they want $70 USD for this thing (at the time of this writing - they've gone up since then)?" I was hesitant at first, mainly because it had no reviews, and also the thought (assumption) that any type of cable switcher will result in signal loss - especially with passive models (of which this model S1 is one). But being the guinea pig that I tend to be, I pulled the trigger and purchased it. When it arrived, I noticed that the box seemed heavy (a bit more than I expected). When I opened the box, I was dumbfounded (in a very, very good way) to see a solid brick of a switcher. Beautifully machined and exceptionally solid (thus the weight of the unit), you could see that this was not going to be no ordinary every-day switcher. The RCA inputs on the back were meticulously designed and constructed and durable and you knew right away that you were dealing with a higher end device. But how would it sound? I immediately connected several DAC's to this unit. By the way, for those not familiar with the term "DAC," it's short for Digital to Analog Converter which can make a world of difference with sound quality on the likes of a PC or a video system. When I selected switch #1 - which happened to have the iFI Zen DAC unit, I could not believe my ears. No signal loss or alteration at all - what you listened to is what you got. And the switching back and forth (between 4 units) is so smooth and high-end, that it will put a smile on your face. And no worrying about using the right power supply as this is a very basic passive unit, that was exceptionally crafted/machined. The moment you handle (pick up) and use this Model S1, you'll be hooked and then wonder why you haven't seen this thing before. So right now I have the following DAC's attached to this GOHIFIAUDIO S1 - those being the iFI Zen DAC, the Schliit Modi 3, the Micca OriGen2, the FX Audio DAC X6, and the Sabaj D3. Switching between them to do a budget DAC audio evaluation was effortless. Another question that folks often have with regards to the possibility of using an RCA audio switcher, is will thick cables (and bending them to connect to other units) result in the switcher being lifted up, or turned in a particular direction. This happens big time with thicker, less pliable cables. I can tell you that in my case, I have each DAC connected to the S1 switcher with a shorter 1 foot RCA cable and the only result was that the smaller DAC's had to be turned somewhat - but the S1 switcher was solid and stayed put! So folks, I'm just one reviewer, but my listening standards are high. I'm gratified to have found this particular Switcher on Amazon. This comes highly recommended! Caveat here - remember, reviews are subjective and all I can do being an audiophile is to call 'em as I see 'em. YMMV..... EDIT - Add-on comments as of 6-29-2020: I just wanted to add on here that I purchased a 2nd switcher due to the fact that the first one was so awesome. I have additional components (i.e. DAC's) that I needed to bring into my system, so I got another one. I'm telling you, this passive model is built quite well and just plain works - without any signal loss or alterations!!!! Since I purchased the first GOHIFIAUDIO S1, I also tried another switcher that was not passive - it had to use a power supply. It was a Chinese made product also, but it failed after two weeks (the right channel stopped working on the 2nd set of RCA inputs). So I had to return that one. That made me realize that you stick with what works best, and that's why I purchased another GOHIFIAUDO S1. The GOHIFIAUDIO S1 sets the standard in my book. And yes, I know it went up in price - like some $20 more - but hey, it is most certainly worth it as you get what you pay for.

Listening wise its like its not even there (in a good way). Totally passive. The knob felt a little janky but its because the screw needed to be tightened and thats not a big deal. This is not an industrial design masterpiece. Its just the exact switching mechanism you are looking for built into a generic project box. That said it does look good next to my stereo components. I recommend using Monoprice RCA cables with it. They are inexpensive and quality made. A little stiff to bend around in back of a stereo but thats okay too. Good sound is worth it. :). There are a lot of junk RCA switchers out there...and RCA switchers are little empty boxes for the most part... but it was either buy this perfectly adequate switcher or build one myself. If you did go that route by the time you ordered the stuff from a direct electronic components warehouse in China, had it sent, waited the 4 weeks and then soldered it all together I bet you would, in the end just end up with something exactly like this product anyway. They just went and did it all for you here. SO spend the extra money, buy this ready made box and go enjoy your music! RECOMMENDED. I bought the 4 channel Solupeak S1 version with gold RCA in/outs. Dunno if I really needed to upgrade but I did and don't regret it :)

This worked perfectly plugged into the aux port on my Marantz 2265B. Trued using the tape in 1 and 2 but sound cut out due to internal bridging when plugging in Fosi amp to drive my KG1.5s in rear and all other Marantz to drive KG4s. This switch allowed me to connect that amp, a CD player, a Bluetooth adapter and my Dishnetwork receiver all with a switch of a button leaving the tape in/outs alone on the Marantz.

The switch seems to be of good quality. I like it and the sound is good but the rca jacks are too small and most of my cables fit loosely and are intermittent. I think I found a fix by using a twisty tie around the left and right cable ends so they are secure and not loose. I didn't notice any bleed through from other channels. Seems like a quality product but they missed the mark with the rca connectors.

Arrived quickly. I ordered it so that there would be more RCA inputs available for a 5-disc CD player. All of the high-level inputs on the rear of the amp were in use so this would provide switching between the 5-disc and the other CD player. It is a passive unit meaning no AC power requirement. The switcher is well constructed with a bit of heft and easy connections. In earlier reviews, there were comments about the length of the input jacks on the back and the feel of the knob on the front. The input stops on the knob can be felt as well as heard. The length of the jacks was not an issue, plenty of room behind in this installation. It is in use while I am typing these notes. The switcher solved a small problem for me quite nicely.

The product was well designed and has a quality build but my particular unit has noticeable play in the selector knob. I'll deal with it but I don't know if it's with all units or just mine. Without that, it would be a 5 star product.

This RCA switch box (in my opinion) is junk. I catch believe it cost $75! Did not work right out of the box. Had no sound out of left RCA output unless the right one was unplugged! Had to wiggle the RCA outputs to get sound on both channels, then turning the input selector switch resulted in no sound out of any 4 inputs and then magically started working. Immediately submitted a return and sending back before it decides not to work again.

Most excellent construction! The RCA jacks are very solid and have a nice fit. The selector switch is super smooth and precise. The enclosure is well made, solid, & asthetically pleasing. This selector switch came well packaged and arrived quickly. I would highly recommend.

質感もよく、外見も非常によいのですが、セレクターノブがカタカタと少しぐらつきます。 フロントパネルに穴をあけてロッドを通しているだけなので、その穴の大きさがロッドより少し大きい為にカタカタとぐらつくようです。 繰り返しのセレクトによる基板やロータリーセレクターにかかる負荷が心配です。 穴をアジャストさせるかグロメットなどを使用して改良する余地がらあると思います。

Gran producto, recomendado 100% para los audiófilos. Las opiniones negativas del producto son totalmente falsas de gente inexperta o mal intencionada. La calidad de construcción es de alta gama, mucho mejor que varias marcas reconocidas. Lo que entra es lo que sale sin ninguna perdida, por eso mismo compré dos piezas.

👌

Well built, robust, does what it says in the tin

Great product, it fit my purpose perfectly super fast delivery on time