Deliver to Botswana
IFor best experience Get the App
Waveshare SN65HVD230 CAN Board Connecting MCUs to CAN Network Features ESD Protection Communication Evaluation Development Board 3.3V
Details
- Brandwaveshare
- Model NameSN65HVD230
- CPU ModelARMv7
- Connectivity TechnologyCAN
- Operating SystemLinux
![Arduino UNO R4 WiFi [ABX00087] – Renesas RA4M1 + ESP32-S3, Wi-Fi, Bluetooth, USB-C, CAN, 12-bit DAC, OP AMP, Qwiic Connector, 12x8 LED Matrix for Advanced IoT & Embedded Projects](https://images-na.ssl-images-amazon.com/images/I/614tXIQWSRL._AC_UL116_SR116,116_.jpg)
Description
🔗 Connect smarter, build faster, lead the CAN revolution!
- POWER SAVVY DESIGN - Operates efficiently at 3.3V, optimizing your embedded projects.
- BUILT IN ESD SHIELD - Protect your investment with advanced electrostatic discharge defense.
- COMPACT LIGHTWEIGHT - Sleek 7.09 x 3.94 x 3.54 inches form factor, perfect for tight spaces.
- EFFORTLESS CAN INTEGRATION - Plug-and-play SN65HVD230 transceiver for instant MCU connectivity.
- CROSS COMPATIBLE CONNECTIVITY - Works flawlessly with PCA82C250 for versatile CAN network setups.
The Waveshare SN65HVD230 CAN Board is a compact, 3.3V-powered development board featuring the SN65HVD230 CAN transceiver with built-in ESD protection. Designed for seamless MCU to CAN network communication, it supports compatibility with PCA82C250 and is ideal for professional embedded system developers seeking reliable, efficient CAN bus integration.
Specifications
| Processor | ARMv7 |
| RAM | LPDDR |
| Wireless Type | 802.11b |
| Brand | waveshare |
| Series | SN65HVD230 |
| Item model number | SN65HVD230 CAN Board |
| Operating System | Linux |
| Item Weight | 0.352 ounces |
| Product Dimensions | 7.09 x 3.94 x 3.54 inches |
| Item Dimensions LxWxH | 7.09 x 3.94 x 3.54 inches |
| Color | SN65HVD230 CAN Board |
| Processor Brand | ARM |
| Number of Processors | 1 |
| Manufacturer | Waveshare |
| ASIN | B00KM6XMXO |
| Is Discontinued By Manufacturer | No |
| Date First Available | May 28, 2014 |
Have a Question? See What Others Asked
Reviews
W**T
Worth the extra $
Works great!
A**R
Works well with a RPi Pico as a CAN bridge for Klipper
I'm using this for a test setup with Klipper to toolhead CAN boards. With Klipper configured for a Raspberry Pi Pico in CAN bridge mode this works well. Here is the wiring, note that Tx/Rx are reversed from Uart1 using the default Klipper configuration:Connections to Waveshare CAN-Board:Can-Board Pico1 TX GPIO5 -- CAN TX (configured with Klipper menuconfig)2 RX GPIO4 -- CAN RX (configured with Klipper menuconfig)3 ground ground4 3.3V 3v3 outputYou use can use any RP2040 based board, I'm using a Waveshare RP2040-Zero.
D**R
Real!! Works! Worth the extra $$
this is the real deal, I have bought other transceivers that say they have the same chip but they don't transmit, they only receive. This one works perfectly transmit and receive. This one is more money but it is worth it.UPDATE: This is a bit overpriced, you can get real MCP 2551 transceivers for less money.
J**S
Work as intended
Does the CANBUS thing. Used two to create a CAN network between two microcontrollers.
M**D
Great device if you are just communicating with a single other device
It works really well, but as others have stated, it has a 120 Ohm termination resistor on the board between CANH and CANL which you can't disable unless you physically remove it from the board. I would have much preferred if they used the two pins on the board as a jumper to allow you to enable/disable this resistor, but unfortunately, that is not the case. If you want to use more than one of these devices on the same bus, you would have to physically remove this resistor from the board.So yeah, definitely use this board if you are just going from one device to another, but if you need several devices, you can use this on one end, and just buy different ones for the other devices which don't have an 'always-on' resistor.
G**I
Works great
tiny little guy but works great with a Teensy, I don't think you need an additional resistor to terminate it, I think this one is internally already terminated but I may be wrong
A**R
Worked!
The Waveshare SN65HVD230 CAN Board worked flawlessly with a Teensy 3.2 interfacing to a NMEA2000 network
S**S
Works great
Does what it’s suppose to do. Used it in a NMEA 2000 project and it worked perfectly.
Common Questions
Trustpilot
3 weeks ago
5 days ago
