LundGenesis Elite Roll Up Soft Roll Up Truck Bed Tonneau Cover | 96872 | Fits 2015 - 2023 Ford F-150 5' 7" Bed (67.1"), Premium Matte Canvas

It actually installed pretty easily but not in "minutes" as touted,ridiculous really. I installed mine in a 2009 f150 Styleside with a 6'6" bed and it fits good with no apparent leaks.It took me about an hour after reading the instructions several times. I installed mine with a plastic bed liner in place which I probably should have modified in a couple places but I was able to do the install without doing so. Tautness adjustment was not necessary but I like having the ability to do so if I need to in the future. Clamps are a little tricky but work good. Quality seems very good for what I'd consider a medium quality tonneau cover. Lockdown on the back works well, we'll see about long term durability. I would be satisfied if it lasted 3 years with moderate use for the price. Looks really nice.Update 3/16/2018 I've had this about a year and a half and it has held up well. The only "flaw" I can identify is that the actual cover should be about an inch or so wider in so the velcro side strips mate together with full contact. That being said it has never lifted and the lockdown system has never needed adjustment. I am very happy with this cover for the money spent. It rolls up and secures quickly when you want it out of the way which is what I wanted.I think I will get my three years out of it.update 8/26/2019 Almost three years and the cover is still in really good shape. The fabric has exceeded my durability expectations and still is pretty much flawless in appearance. Lock down has never given any problems and the cover has never been pulled up by the wind when on the road. I could see getting a couple more years at least out of this , so great marks to the manufacturer for a quality product that works and is lasting well.

I purchased this item due to a massive rebate combined with a 15% discount. At the time of this review the rebate for $65 is available until the first of next year, so if you're on the fence... just get it!Installation was mostly painless by myself. A few times it would have helped to have an extra set of hands for alignment, but even working into darkness it took maybe 1.5 hours to get it right. If I would have had daylight for the entire process, I don't think it would have taken over an hour.I did have one latch break, and I was unsure if it was already cracked or I applied too much pressure so I was willing to purchase a replacement. Lunds amazing customer service sent me a replacement for free! The only downside is I haven't been able to fully adjust the tension yet. However, even without that adjustment the cover snaps in pretty tight and there is minimal fluctuation while driving. The top seems much more stable than other soft covers I've seen driving down the road.Long term, I do have concerns over the Velcro maintaining it's hold. But from other reviews it seems fairly simple to replace in a few years if necessary. But from the feel of the cover material, I have zero concern about that part lasting the elements compared to vinyl type covers some of my friends have that have wear marks, cracks and splits, or are fading within a year.One thing to note during installation on 15-17 F150's. If you have the plastic covers on your bed rail, the pins that hold them in are just barely wide enough to get the clamps in by the tail gate. You may be better off going towards the cab until you pass the pins. While this does put the clamp in front of the bed light (if you have them), it doesn't seem to affect the coverage of the light and makes for a much simpler install.

Product is as expected. On a previous vehicle, I had a solid hard material tonneau cover which was great looking, but it severely affected the usage of my truck bed. I couldn't carry anything in the bed over 22" high unless I completely removed the cover, which took two people.In contrast, the Lund Genesis Tri-Fold Cover is a good compromise. It installed easily (less than 5 minutes) and provides a good look and a degree of theft deterrence that I wanted. Went through the car wash a couple of times, everything in the bed stayed dry.It fits about as well as can be expected - due to the side of the truck bed not being precisely straight, the cover appears to be a bit off as far as the alignment goes, but you really have to look hard to see it. The most important thing for me is that it has no external keyholes or latches, presenting a clean, smooth appearance, nothing that could leak, and coupled with my locking tailgate, I'm happy with the overall security. Minor drawback - the vinyl material does tend to "ripple" slightly at highway speeds, but I consider that to be expected as it is a flexible vinyl material stretched over an aluminum frame. Even though I can see it "ripple" in my rear view mirror, it is still nice and taut overall, and there is no apparent slack in the material. A major plus for me is that I can roll the cover back easily (it secures with catches when folded) to allow greater use of my truck bed. If necessary, I can remove the entire cover in only a couple of minutes, then easily re-install when done. Overall, I'm very satisfied with this product, especially since the cost was about 25% of my previous hard cover. It's only because of the "ripple" that I didn't give it five stars.

I am not a fan of the plastic looking vinyl that I have seen on so many other roll top covers. This twill roll up cover is amazing. It looks great, feels amazing, water does not protrude through the material. I love this thing. As long as it lasts and doesn't color fade, it is well worth it.The install is tougher and not quick. It is no different than any other roll up cover, I am just not a fan of the rail clamps and their installation.I do get water that leaks in around the perimeter of the cover, but I was not interested in keeping that out so didn't spend the time to water proof it all.The box was missing a part, Lund tech support transferred me to 4 different departments, and 3 weeks later I still don't have my part, but thankfully it was just a nut/washer that go on a bolt. I just got one from a local hardware store. Would be nice if their tech support actually shipped out the part.

Looks good - Made in USA hopefully it will also mean that there is proper costumer service and replacement parts available when need it.

The cover was several days late and the packaging was damaged with some of the needed hardware missing and one of the weather strip seals ripped off. Not a manufacturer issue but a issue with how Amazon decided to ship this.Installation was easy enough even though the instructions aren’t very clear and definitely could be improved. Only basic tools required which was nice. My main issue is with the way the cover is positioned in the front rail. It’s offset to one side so on one side of the truck, the cover reaches way past the rail and on the other side, it barely reaches over. I took the cover off to make sure I didn’t screw up the install but it looks like the cover just isn’t positioned correctly in the rail. I may be able to fix it by cutting out some of the rail so I can slid the cover over a bit more to one side. Not something I want to do on a product that is supposed to be a reputable brand cover but definitely something that will have to be done to be able to center the actual cover on the bed. It does cover both side rails, but just barely.The tension mechanism seems nice enough although I am getting quite a lot of flapping at even low speed. This may be due to the fact I’m not able to get good tension on the side rails but it does flap around quite a bit especially at highway speeds. I know there is some flapping to be expected with roll up covers but I feel this is a bit excessive.Overall, an ok cover for the price. Not great, but ok.

excellent!! product was great, easy install on my 2015 F150 5.5 box. installed in 10 mins and includes extra weather stripping for front of box.the seller i would give an excellent review as i had an issue with shipping and they took care of it immediately!!

Le matériel de la toile est de bonne qualité,mais l'ensemble n'est pas fabriqué avec attention.Les joints d'étanchéités sont collés rapidement et le Velcro qui est sur les rails cherche à décoller puisque le rail est arrondi.Ils utilisent un Velcro autocollant plutôt que d'insérer un avec base de plastique dans le rail.Conception moins bien fait que Truxedo.