Midwest Hearth Wood Stove Replacement Gasket Kit for Woodburning Stoves - Graphite Impregnated Fiberglass Gaskets and Adhesive (5/8" x 84" Rope)

Product was easy to cut (strong scissors needed), Directions were clear. Surface prep is important, and if done right, it worked perfectly.

Worked perfectly. It sealed my wood stove and no more Odar in the room.

Easy to install, came with adhesive. Did the trick stove is airtight again.

It works pretty good for my char griller, but the one caveat being the cement isnt very strong. At least not on the paint of my grill. I cleaned and scrubbed it before application but it still gave me some difficulty and I'm not the most confident its gonna last forever. It might bond better to bare metal. 5-stars because it's not advertised for grills and im sure it would be just fine in a recommended application. If i could start over(and i might) i read about using rivets to fasten the gasket to the edge of my grill soo I'm inclined to go that route and just skip the sealant next time. Cheers!

I bought this to replace a woodstove door gasket at my son's new to him, house. The directions were clear and easy to follow, the actual gasket seems very well made and the supplied adhesive was more than enough for the project. I would absolutely buy this again.NOTES: I did use spring clamps to hold the new gasket in place on the door while I completed the entire installation. That was not in the instructions but helped a lot. Second thing, be cautious with the adhesive. It does eventually come off your fingers, not so much on your jeans. Might be a permanent thing there. :)

This was easy to put on. Glue has held up very nice. The tape was perfect size.

My husband used this on the small Woodburner stove he took apart and reassembled . It was the right thickness, stuck very well to the stove and stove had no smoke leaks when he did a trial burn

The door gasket on our Avalon pellet stove had been getting worse and worse. I dreaded the thought of trying to fix this. It seemed daunting a little, and it seemed to be sealing so why mess with it. This year it just fell apart a bit and so, it was time. I followed the instructions provided and prepped it up, the gasket glue went on nice and I pressed the gasket into it and mounted the door back on to the stove to apply pressure to the gasket so it set up formed to the stove. It worked perfect! I was a wuss, this wasn't bad at all and it came out great. A bonus was we used to clean the glass in the door every 2 or 3 bags, now its about every 10-12 bags and its no where near as much soot or brown ash on the glass as before. Also the ash build up is much much less, again 2 or 3 times as much pellets before a ash pan clean out. The gasket really changed the way the stove worked. So happy.

Parfais merci

Excellent produit

Just what I needed to complete my wood stove rebuild.I recommend 5*****

An important product and was very easy to use. Received in a timely manner and before we needed to use our wood stove. Where we live the power goes out quite regular in the winter due to storms. Heat is a needed commodity especially when wind chills reach -50

i whas purchasing seal every mounth and whas looking for a better quality and more heat resistent sealsince i did that purchase and easy install i have run my wood furnace purple red so many time and the seal is still like new