Size Name:1 kg
Phosphorous (P) is an element which is present in aquariums in various forms, but mainly as a botanical phosphate, which
constitutes a primary source of tion for algae. High concentrations of phosphates, in particular, intervene
positively on the sm of green algae, while brown algae proliferate with high concentrations of silicates.
Besides producing the undesired effect of aiding the proliferation of algae, high levels of phosphate can inhibit the
calcification process in coral and other invertebrates. The possible causes of the increase in phosphate in an aquarium
are various, including the decomposition of dead organisms or vegetation, the decomposition of uneaten food, impurities
in the original water or the additives used. The reduction in these phosphates (and secondly the silicates) is
therefore a fundamental operation for the correct maintenance of an aquarium. In most cases, the concentration of
phosphates are recommended at 0.05 ppm in order to keep the aquarium free of infesting algae. Lower values, namely 0.01
ppm are necessary for marine and barrier aquariums, in order to allow the correct growth of hard coral. The best method
of lowering the phosphate and silicate concentration is the of the water with a specific product; REMOVER PO4
& SiO2 REAKTOR is made up of Aluminium oxide, in a form and dimension optimized to increase the efficiency of phosphate
removal. Aluminium oxide acts with a powerful absorption, forming stable complexes of phosphate and silicate molecules
on its surface. With respect to other products with a different formulation, REMOVER PO4 & SiO2 REAKTOR has
some obvious advantages; The reduction in phosphate levels usually treated with aluminium oxide is far more rapid and
effective than calcium hydroxide solutions. Compared to iron hydroxide, the effectiveness in absorption of Aluminium
oxide is comparable, and fully sufficient in aquarium use, whereas the value for money is, however, totally in favour of
aluminium oxide. Regarding aluminium oxide, it is important to underline that this product is highly insoluble in water
and its use does not allow the release of soluble aluminium or other elements which could have negative effects on the
inhabitants in the aquarium; in-depth scientific studies show that no traceable aluminium is released, neither are there
undesired effects even after repeated use of up to 3 times more aluminium oxide than the advised dosage. Another aspect
which makes REMOVER PO4 & SiO2 REAKTOR particularly effective in the removal of phosphates and silicates is its peculiar
morphological and dimensional characteristics. REMOVER PO4 & SiO2 REAKTOR is, in fact, in the form of porous slivers,
obtained from the chipping of aluminium oxide spheres. This allows a great increase of the surface/volume ratio (up to
300 m2/g), even thanks to the fact that the inside of the spheres are even more porous than the external surface,
creating a vast increase in absorption.
Directions
----------
Insert REMOVER PO4 & SiO2 REAKTOR in its net and rinse with reverse-osmosis water to eliminate residues and dust (the
product may liberate plenty of heat the first time it comes into contact with water: use protective gloves and/or place
the product in a container or cup for the first rinse). After which place this net in the filter or Sump, ensuring that
there is a strong water flow. It is even more effective if used in a filter with fluid bed or in a phosphate reactor.
REMOVER PO4 & SiO2 REAKTOR, as all absorbent material, is characterized by an maximum absorption capacity and must,
therefore, be changed regularly if the phosphate level remains unaltered or lowers very gradually. For this reason it is
important to test the phosphate concentration level in the aquarium regularly. Aluminium oxide and Iron hydroxide cannot
be regenerated in any way, as phosphates and silicates are removed from the water through the formation of stable
complexes on the surface. Therefore, REMOVER PO4 & SiO2 REAKTOR , once used, cannot be re-utilized.
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse', function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
Safety Warning
--------------
This product is for aquarium, aquaterrarium use only .The product must not be used in the fish industry where produce is
destined for human consumption.
Box Contains
------------
Aluminium bag with Remover
See more ( javascript:void(0) )
- Resin for the elimination of phosphates and silicates.
- Effective decrease of phosphates and silicates thanks to the granular-metric characteristic.
- Prevents possible deterioration of the corals.
- Prevents the growth of undesired algae.
- Does not release soluble aluminium components or other toxic substances.
- ›See more product details.